Rotor-X Paddle wheel Flow Sensor

The many material choices, including PP, PVC, PTFE, PVDF, SS316L, make this model highly versatile and chemically-compatible to many liquid process solutions. The wide dynamic flow range of 0.3 to 7 m/s (1 to 23 ft/s) allows the sensor to measure liquid flow rates in full pipes and can be used in low pressure systems.

Rotor-X Paddlewheel Flow Sensors  can be installed in up to DN900 (36 in.) pipes using Signet's comprehensive line of custom fittings. These custom fittings, which include tees, saddles, and weldolets, set the sensor to the proper insertion depth into the process flow. The sensors are also offered in configurations for wet-tap requirements.


Specification:
Connection: DN32  G1+1/4"
Flow rate range: 0.15-8m/S
Pipe diameter range: dn15-dn900
Output signal: square wave, open collector NPN; 40-50hz/M/S;
Power supply voltage: DC5-24v
Measurement accuracy: 1%-3%
Linear accuracy: 1%
Repeatability accuracy: 0.5%

Pressure and Temperature:
PP body: 12.5bar @ 25 ℃ - 1.7bar @ 80 ℃
CPVC body: 12.5bar @ 25 ℃ - 1.7bar @ 80 ℃
PVDF body: 12.5bar @ 25 ℃ - 2.5bar @ 100 ℃
PTFE body: 12.5bar @ 25 ℃ - 2.5bar @ 100 ℃
SS316 body: 30bar @ 100 ℃